Non-SAE Mount Overhung Load Adaptors

  • Non-SAE Overhung Load Adaptors | Overhung Load Adapters
  • Non-SAE Overhung Load Adaptors | Overhung Load Adapters
  • Non-SAE Overhung Load Adaptors | Overhung Load Adapters
Click image to enlarge

4-bolt mount overhung load adaptors absorb stress to help prevent premature motor or pump failure caused by axial or radial overhung loads on motor pumps and shafts. Non-standard overhung load adaptors are designed to match non-SAE size motors. They do not have an SAE size designation but provide the same performance features as SAE model 4 bolt mount overhung load adaptors.
 

Non-Standard Overhung Load Adaptors for Non-SAE Motor Applications

Non-SAE overhung load adaptors from Zero-Max feature 4-bolt mounting input that accommodates same loads as the Model 200 SAE A mount for applications with motor or pump shafts up to 1" diameter. 4 bolt mount overhung load adaptors provide a solid, permanent mounting surface and can be face-mounted or foot-mounted.  
 
Additional features of our non-standard overhung load adapters include:
  • Deep-grooved ball bearings
  • Accepts speeds up to 3800 RPM with proper lubrication
  • Supports heavy axial and radial loads
  • Rugged cast iron housings
  • 130,000 PSI stress-proof shafts
Select from the products listed below to request a quote or contact us to learn more about customization options for our non-SAE overhung load adaptors.
 

Model 410 Non-SAE Overhung Load Adaptor

Feature non-SAE 4-bolt horizonal shaft mounting and accept speeds up to 3800 RPM. They are designed to fit a popular LSHT Geroler motor and have a 1144 stress proof steel housing. Additional features include:
  • Deep groove ball bearings
  • Input bore diameter and depth: 1” keyed - bore depth is 2.18"
  • Output shaft diameter: 1”
  • Output shaft keyway: 1/4” x 1/8”

Model 410F Non-SAE Overhung Load Adaptor

Non-SAE 4-bolt overhung load adaptor designed to fit a popular LSHT Geroler motor. Accepts speeds up to 3100 RPM and features standard horizontal mounting. Sizing features are as follows:
  • Deep groove ball bearings
  • Input bore diameter and depth: 1” through-bore
  • Output shaft diameter: 1" through-bore
  • Output shaft keyway: 1/4" x 1/8" keyway the entire length of the bore

Model 415 Non-SAE Overhung Load Adaptor

Non-SAE 4-bolt mount overhung load adaptor that accepts speeds up to 3800 RPM and is configured for horizontal shaft mounting. Designed to fi t a popular LSHT Geroler motor with the following sizing:
  • Input Bore Diameter and Depth: 1" keyed - bore depth is 2.18"
  • Output Shaft Diameter:1-1/2"
  • Output Shaft Keyway: 3/8" x 3/16" keyway

Request a Quote for Non-SAE Overhung Load Adaptors

Request a quote for 4-bolt mount overhung load adaptors today or contact us to learn more.  We also offer several SAE overhung load adaptors in A-F mounts and with customization available upon request

MANUFACTURING FACTORY FLOOR
COMPETANCY & INSPECTIONS

The Zero-Max culture is one of continuous research to
improve product, process, and service.

Contact Us

Manufacturing
Factory Floor
Competancy and Inspections