ServoClass HSN High Gain Damping Couplings
Part Number: SN040R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Double Flex sc040r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SN040R Specifications
Click for English
Click for Metric
| Part Number | SN040R |
| Operating Torque: | 106 in-lbs |
| Operating Torque : | 12 Nm |
| Minimum Bore: | 0.3125 inches |
| Minimum Bore : | 8 mm |
| Maximum Bore: | 0.9375 inches |
| Maximum Bore : | 24 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 174 in-lbs/degree |
| Torsional Stiffness : | 1,128 Nm/rad |
| Axial Stiffness: | 3,455 lbs/inch |
| Axial Stiffness : | 605 N/mm |
| Parallel Misalignment: | 0.008 inches |
| Parallel Misalignment : | 0.2 mm |
| Angular Misalignment: | 1.5 ° |
| Axial Misalignment: | 0.012 inches |
| Axial Misalignment : | 0.3 mm |
| Inertia: | See Catalog |
| Inertia : | See Catalog |
| Weight: | See Catalog |
| Weight : | See Catalog |
| Outside Diameter (D): | 1.732 Inches |
| Outside Diameter (D) : | 44 mm |
| Overall Length (L): | 1.890 Inches |
| Overall Length (L) : | 48 mm |
| Hub Length (LB): | 0.610 Inches |
| Hub Length (LB) : | 15.5 mm |
| Reduced Hub Diameter (N): | 1.165 Inches |
| Reduced Hub Diameter (N) : | 29.6 mm |
| Distance Between Shaft Ends (DBSE): | 0.669" |
| Distance Between Shaft Ends (DBSE) : | 17 mm |
| Inside Diameter of Flex Element (K): | 0.925 Inches |
| Inside Diameter of Flex Disc (K) : | 23.5 mm |
| Clamp Screw to Bore (A2): | 0.669 Inches |
| Clamp Screw to Bore (A2) : | 17 mm |
| Clamp Screw to Bore (A1, Reduced Hub): | 0.433" |
| Clamp Screw to Bore (A1, Reduced Hub) : | 11 mm |
| Clamp Screw to End of Hub (C): | 0.177 Inches |
| Clamp Screw to End of Hub (C) : | 4.5 mm |
| Clamp Screw Size (M): | M4 |
| Clamp Screw Size (M) : | M4 |
| Tightening Torque: | 30 in-lbs |
| Tightening Torque : | 3.4 Nm |