ServoClass Double Flex Couplings
Part Number: SC010R
Click image to enlarge
Specifications
Click for English
Click for Metric
- Operating Torque: 8.9 in-lbs
- Operating Torque : 1 Nm
- Minimum Bore: 0.125 inches
- Minimum Bore : 3 mm
- Maximum Bore: 0.3125 inches
- Maximum Bore : 8 mm
- Maximum Speed: 10,000 RPM
- Torsional Stiffness: 108 in-lbs/degree
- Torsional Stiffness : 700 Nm/rad
- Axial Stiffness: 400 lbs/inch
- Axial Stiffness : 70 N/mm
- Parallel Misalignment: 0.004 inches
- Parallel Misalignment : 0.11 mm
- Angular Misalignment: 1 °
- Axial Misalignment: 0.008 inches
- Axial Misalignment : 0.20 mm
- Inertia: 0.0027 lb-in²
- Inertia : 8.0 x 10⁻⁷ kg-m²
- Weight: 0.53 ounces
- Weight : 15 grams
- Outside Diameter (D): 0.748 inches
- Outside Diameter (D) : 19 mm
- Overall Length (L): 1.020 Inches
- Overall Length (L) : 25.9 mm
- Hub Length (LB): 0.360 inches
- Hub Length (LB) : 9.15 mm
- Distance Between Shaft Ends (DBSE): 0.299"
- Distance Between Shaft Ends (DBSE) : 7.6 mm
- Inside Diameter of Flex Disc (K): 0.335 Inches
- Inside Diameter of Flex Disc (K) : 8.5 mm
- Clamp Screw to Bore (A2): 0.228 Inches
- Clamp Screw to Bore (A2) : 5.8 mm
- Clamp Screw to End of Hub (C): 0.124 Inches
- Clamp Screw to End of Hub (C) : 3.15 mm
- Clamp Screw Size (M): M2.5 (0.3125" bore: M2)
- Clamp Screw Size (M) : M2.5 (8mm bore: M2)
- Tightening Torque: 9 in-lbs (0.3125" bore: 3.5 in-lbs/ M2 Screw)
- Tightening Torque : 1 Nm (8mm bore: 0.4 Nm/ M2 Screw)
Technical Resources
| Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |