End-of-Shaft Mount Torq-Tender with Actuating Pin Model TT2-JP
Part Number: TT2-JP
Click image to enlarge
Click image to enlarge
Product Note
- For Bore Diameters at or above 9/16” (or 13mm), keyway will be positioned 180° from location shown in drawing above
Technical Resources
| End-of-Shaft Mount Torq-Tenders with Actuating Pin - Type JP tt2-jp Configuration | |
| Shaft Bore (C) | |
TT2-JP Specifications
Click for English
Click for Metric
| Part Number | TT2-JP |
| Torque Range: | 4 - 140 in-lbs (must specify) |
| Torque Range : | 0.5 - 15.8 Nm (must specify) |
| Minimum Bore: | 0.3125 inches |
| Minimum Bore : | 8 mm |
| Max Bore (C): | 0.625 inches |
| Max Bore (C) : | 16 mm |
| Housing Diameter (A): | 2.165 inches |
| Housing Diameter (A) : | 55.0 mm |
| Overall Length (K): | 2.110 inches |
| Overall Length (K) : | 53.6 mm |
| Dimension (G): | 1.625 inches |
| Dimension (G) : | 41.3 mm |
| Dimension (J): | 1.950 inches |
| Dimension (J) : | 49.5 mm |
| Dimension (L): | 0.750 inches |
| Dimension (L) : | 19.0 mm |
| Dimension (N): | 0.625 inches |
| Dimension (N) : | 15.9 mm |
| Dimension (O): | 0.375 inches |
| Dimension (O) : | 9.5 mm |
| Dimension (S): | 1.010 inches |
| Dimension (S) : | 25.7 mm |
| Dimension (T): | 0.125 inches |
| Dimension (T) : | 3.18 mm |
| Dimension (U): | 0.125 inches |
| Dimension (U) : | 3.18 mm |
| Dimension (W): | 0.200 inches |
| Dimension (W) : | 5.08 mm |
| Weight: | 1.25 lbs |
| Weight : | 0.57 kg |