ServoClass Single Flex Couplings
Part Number: SD100R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd100r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD100R Specifications
Click for English
Click for Metric
| Part Number | SD100R |
| Operating Torque: | 2,213 in-lbs |
| Operating Torque : | 250 Nm |
| Minimum Bore: | 1.3125 inches |
| Minimum Bore : | 32 mm |
| Maximum Bore: | 1.750 inches |
| Maximum Bore : | 45 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 18,535 in-lbs/degree |
| Torsional Stiffness : | 120,000 Nm/rad |
| Axial Stiffness: | 664 lbs/inch |
| Axial Stiffness : | 111 N/mm |
| Parallel Misalignment: | 0.001 inches |
| Parallel Misalignment : | 0.02 mm |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.030 inches |
| Axial Misalignment : | 0.74 mm |
| Inertia: | 6.36 lb-in² |
| Inertia : | 1.858 x 10-³ kg-m² |
| Weight: | 41.6 ounces |
| Weight : | 1,181 grams |
| Outside Diameter (D): | 4.095 Inches |
| Outside Diameter (D) : | 104 mm |
| Overall Length (L): | 2.748 Inches |
| Overall Length (L) : | 69.8 mm |
| Hub Length (LB): | 1.181 Inches |
| Hub Length (LB) : | 30 mm |
| Distance Between Shaft Ends (DBSE): | 0.386" |
| Distance Between Shaft Ends (DBSE) : | 9.8 mm |
| Inside Diameter of Flex Disc (K): | 1.890 Inches |
| Inside Diameter of Flex Disc (K) : | 48 mm |
| Clamp Screw to Bore (A2): | 1.535 Inches |
| Clamp Screw to Bore (A2) : | 39 mm |
| Clamp Screw to End of Hub (C): | 0.354 Inches |
| Clamp Screw to End of Hub (C) : | 9 mm |
| Clamp Screw Size (M): | M8 |
| Clamp Screw Size (M) : | M8 |
| Tightening Torque: | 266 in-lbs |
| Tightening Torque : | 30 Nm |