ServoClass Single Flex Couplings
Part Number: SD035R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd035r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD035R Specifications
Click for English
Click for Metric
| Part Number | SD035R |
| Operating Torque: | 89 in-lbs |
| Operating Torque : | 10 Nm |
| Minimum Bore: | 0.250 inches |
| Minimum Bore : | 6 mm |
| Maximum Bore: | 0.750 inches |
| Maximum Bore : | 19 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 2,781 in-lbs/degree |
| Torsional Stiffness : | 18,000 Nm/rad |
| Axial Stiffness: | 640 lbs/inch |
| Axial Stiffness : | 112 N/mm |
| Parallel Misalignment: | 0.001 inches |
| Parallel Misalignment : | 0.02 mm |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.010 inches |
| Axial Misalignment : | 0.25 mm |
| Inertia: | 0.063 lb-in² |
| Inertia : | 1.84 x 10-⁵ kg-m² |
| Weight: | 3.0 ounces |
| Weight : | 84 grams |
| Outside Diameter (D): | 1.535 Inches |
| Outside Diameter (D) : | 39 mm |
| Overall Length (L): | 1.339 inches |
| Overall Length (L) : | 34 mm |
| Hub Length (LB): | 0.610 Inches |
| Hub Length (LB) : | 15.5 mm |
| Distance Between Shaft Ends (DBSE): | 0.118" |
| Distance Between Shaft Ends (DBSE) : | 3 mm |
| Inside Diameter of Flex Disc (K): | 0.669 Inches |
| Inside Diameter of Flex Disc (K) : | 17 mm |
| Clamp Screw to Bore (A2): | 0.551 inches |
| Clamp Screw to Bore (A2) : | 14 mm |
| Clamp Screw to End of Hub (C): | 0.177 Inches |
| Clamp Screw to End of Hub (C) : | 4.5 mm |
| Clamp Screw Size (M): | M4 |
| Clamp Screw Size (M) : | M4 |
| Tightening Torque: | 30 in-lbs |
| Tightening Torque : | 3.4 Nm |