Click image to enlarge
ServoClass Single Flex Couplings
Part Number: SD030R
Warning: array_merge(): Argument #2 is not an array in /data/www/webroot/zeromax/www.zero-max.com/public_html/includes/classes/image_viewer.php on line 35
Click image to enlarge
Specifications
Click for English
Click for Metric
- Operating Torque: 44 in-lbs
- Operating Torque : 5 Nm
- Minimum Bore: 0.1875 inches
- Minimum Bore : 5 mm
- Maximum Bore: 0.625 inches
- Maximum Bore : 16 mm
- Maximum Speed: 10,000 RPM
- Torsional Stiffness: 1,236 in-lbs/degree
- Torsional Stiffness : 8,000 Nm/rad
- Axial Stiffness: 366 lbs/inch
- Axial Stiffness : 64 N/mm
- Parallel Misalignment: 0.001 inches
- Parallel Misalignment : 0.02 mm
- Angular Misalignment: 1 °
- Axial Misalignment: 0.008 inches
- Axial Misalignment : 0.20 mm
- Inertia: See Catalog
- Inertia : See Catalog
- Weight: See Catalog
- Weight : See Catalog
- Outside Diameter (D): 1.339 inches
- Outside Diameter (D) : 34 mm
- Overall Length (L): 1.075 Inches
- Overall Length (L) : 27.3 mm
- Hub Length (LB): 0.488 Inches
- Hub Length (LB) : 12.4 mm
- Reduced Hub Diameter (N): 0.850 Inches
- Reduced Hub Diameter (N) : 21.6 mm
- Distance Between Shaft Ends (DBSE): 0.098"
- Distance Between Shaft Ends (DBSE) : 2.5 mm
- Inside Diameter of Flex Disc (K): 0.571 Inches
- Inside Diameter of Flex Disc (K) : 14.5 mm
- Clamp Screw to Bore (A2): 0.492 Inches
- Clamp Screw to Bore (A2) : 12.5 mm
- Clamp Screw to Bore (A1, Reduced Hub): 0.315"
- Clamp Screw to Bore (A1, Reduced Hub) : 8 mm
- Clamp Screw to End of Hub (C): 0.148 Inches
- Clamp Screw to End of Hub (C) : 3.75 mm
- Clamp Screw Size (M): M3
- Clamp Screw Size (M) : M3
- Tightening Torque: 13 in-lbs
- Tightening Torque : 1.5 Nm
| ServoClass Single Flex sd030r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
Technical Resources