ServoClass Single Flex Couplings
Part Number: SD025R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd025r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD025R Specifications
Click for English
Click for Metric
| Part Number | SD025R |
| Operating Torque: | 35 in-lbs |
| Operating Torque : | 4 Nm |
| Minimum Bore: | 0.250 inches |
| Minimum Bore : | 5 mm |
| Maximum Bore: | 0.500 inches |
| Maximum Bore : | 14 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 865 in-lbs/degree |
| Torsional Stiffness : | 5,600 Nm/rad |
| Axial Stiffness: | 343 lbs/inch |
| Axial Stiffness : | 60 N/mm |
| Parallel Misalignment: | 0.001 inches |
| Parallel Misalignment : | 0.02 mm |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.007 inches |
| Axial Misalignment : | 0.19 mm |
| Inertia: | 0.013 lb-in² |
| Inertia : | 3.67 x 10-⁶ kg-m² |
| Weight: | 1.0 ounces |
| Weight : | 29 grams |
| Outside Diameter (D): | 1.142 Inches |
| Outside Diameter (D) : | 29 mm |
| Overall Length (L): | 0.921 Inches |
| Overall Length (L) : | 23.4 mm |
| Hub Length (LB): | 0.423 Inches |
| Hub Length (LB) : | 10.75 mm |
| Distance Between Shaft Ends (DBSE): | 0.075" |
| Distance Between Shaft Ends (DBSE) : | 1.9 mm |
| Inside Diameter of Flex Disc (K): | 0.571 Inches |
| Inside Diameter of Flex Disc (K) : | 14.5 mm |
| Clamp Screw to Bore (A2): | 0.433 Inches |
| Clamp Screw to Bore (A2) : | 11 mm |
| Clamp Screw to End of Hub (C): | 0.130 inches |
| Clamp Screw to End of Hub (C) : | 3.3 mm |
| Clamp Screw Size (M): | M2.5 |
| Clamp Screw Size (M) : | M2.5 |
| Tightening Torque: | 9 in-lbs |
| Tightening Torque : | 1 Nm |