ServoClass Single Flex Couplings
Part Number: SD010R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd010r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD010R Specifications
Click for English
Click for Metric
| Part Number | SD010R |
| Operating Torque: | 8.9 in-lbs |
| Operating Torque : | 1 Nm |
| Minimum Bore: | 0.125 inches |
| Minimum Bore : | 3 mm |
| Maximum Bore: | 0.3125 inches |
| Maximum Bore : | 8 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 216 in-lbs/degree |
| Torsional Stiffness : | 1,400 Nm/rad |
| Axial Stiffness: | 799 lbs/inch |
| Axial Stiffness : | 140 N/mm |
| Parallel Misalignment: | 0.001 inches |
| Parallel Misalignment : | 0.02 mm |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.004 inches |
| Axial Misalignment : | 0.10 mm |
| Inertia: | 0.0019 lb-in² |
| Inertia : | 5.8 x 10-⁷ kg-m² |
| Weight: | 0.39 ounces |
| Weight : | 11 grams |
| Outside Diameter (D): | 0.748 inches |
| Outside Diameter (D) : | 19 mm |
| Overall Length (L): | 0.762 Inches |
| Overall Length (L) : | 19.35 mm |
| Hub Length (LB): | 0.360 inches |
| Hub Length (LB) : | 9.15 mm |
| Distance Between Shaft Ends (DBSE): | 0.041" |
| Distance Between Shaft Ends (DBSE) : | 1.05 mm |
| Inside Diameter of Flex Disc (K): | 0.335 Inches |
| Inside Diameter of Flex Disc (K) : | 8.5 mm |
| Clamp Screw to Bore (A2): | 0.228 Inches |
| Clamp Screw to Bore (A2) : | 5.8 mm |
| Clamp Screw to End of Hub (C): | 0.124 Inches |
| Clamp Screw to End of Hub (C) : | 3.15 mm |
| Clamp Screw Size (M): | M2.5 (0.3125" bore: M2) |
| Clamp Screw Size (M) : | M2.5 (8mm bore: M2) |
| Tightening Torque: | 9 in-lbs (0.3125" bore: 3.5 in-lbs/ M2 Screw) |
| Tightening Torque : | 1 Nm (8mm bore: 0.4 Nm/ M2 Screw) |