ServoClass Single Flex Couplings
Part Number: SD005R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd005r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD005R Specifications
Click for English
Click for Metric
| Part Number | SD005R |
| Operating Torque: | 5.3 in-lbs |
| Operating Torque : | 0.6 Nm |
| Minimum Bore: | 0.125 inches |
| Minimum Bore : | 3 mm |
| Maximum Bore: | 0.1875 inches |
| Maximum Bore : | 6 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 77 in-lbs/degree |
| Torsional Stiffness : | 500 Nm/rad |
| Axial Stiffness: | 799 lbs/inch |
| Axial Stiffness : | 140 N/mm |
| Parallel Misalignment: | 0.001 inches |
| Parallel Misalignment : | 0.02 mm |
| Angular Misalignment: | 0.5 ° |
| Axial Misalignment: | 0.002 inches |
| Axial Misalignment : | 0.05 mm |
| Inertia: | 0.0009 lb-in² |
| Inertia : | 2.6 x 10-⁷ kg-m² |
| Weight: | 0.25 ounces |
| Weight : | 7 grams |
| Outside Diameter (D): | 0.630 inches |
| Outside Diameter (D) : | 16 mm |
| Overall Length (L): | 0.657 Inches |
| Overall Length (L) : | 16.7 mm |
| Hub Length (LB): | 0.309 Inches |
| Hub Length (LB) : | 7.85 mm |
| Distance Between Shaft Ends (DBSE): | 0.039" |
| Distance Between Shaft Ends (DBSE) : | 1 mm |
| Inside Diameter of Flex Disc (K): | 0.256 Inches |
| Inside Diameter of Flex Disc (K) : | 6.5 mm |
| Clamp Screw to Bore (A2): | 0.189 Inches |
| Clamp Screw to Bore (A2) : | 4.8 mm |
| Clamp Screw to End of Hub (C): | 0.098 Inches |
| Clamp Screw to End of Hub (C) : | 2.5 mm |
| Clamp Screw Size (M): | M2.0 |
| Clamp Screw Size (M) : | M2.0 |
| Tightening Torque: | 3.5 in-lbs |
| Tightening Torque : | 0.4 Nm |