ServoClass Single Flex Couplings
Part Number: SD002R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Single Flex sd002r Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
SD002R Specifications
Click for English
Click for Metric
| Part Number | SD002R |
| Operating Torque: | 2.2 in-lbs |
| Operating Torque : | 0.25 Nm |
| Minimum Bore: | 0.125 inches |
| Minimum Bore : | 3 mm |
| Maximum Bore: | 0.1875 inches |
| Maximum Bore : | 5 mm |
| Maximum Speed: | 10,000 RPM |
| Torsional Stiffness: | 29 in-lbs/degree |
| Torsional Stiffness : | 190 Nm/rad |
| Axial Stiffness: | 194 lbs/inch |
| Axial Stiffness : | 34 N/mm |
| Parallel Misalignment: | 0.0003 inches |
| Parallel Misalignment : | 0.01 mm |
| Angular Misalignment: | 0.5 ° |
| Axial Misalignment: | 0.001 inches |
| Axial Misalignment : | 0.04 mm |
| Inertia: | 0.0002 lb-in² |
| Inertia : | 6.0 x 10-⁸ kg-m² |
| Weight: | 0.10 ounces |
| Weight : | 3 grams |
| Outside Diameter (D): | 0.470 inches |
| Outside Diameter (D) : | 12 mm |
| Overall Length (L): | 0.486 Inches |
| Overall Length (L) : | 12.35 mm |
| Hub Length (LB): | 0.232 Inches |
| Hub Length (LB) : | 5.9 mm |
| Distance Between Shaft Ends (DBSE): | 0.021" |
| Distance Between Shaft Ends (DBSE) : | 0.55 mm |
| Inside Diameter of Flex Disc (K): | 0.224 Inches |
| Inside Diameter of Flex Disc (K) : | 5.6 mm |
| Clamp Screw to Bore (A2): | 0.146 Inches |
| Clamp Screw to Bore (A2) : | 3.7 mm |
| Clamp Screw to End of Hub (C): | 0.074 Inches |
| Clamp Screw to End of Hub (C) : | 1.9 mm |
| Clamp Screw Size (M): | M1.6 |
| Clamp Screw Size (M) : | M1.6 |
| Tightening Torque: | 2 in-lbs |
| Tightening Torque : | 0.23 Nm |