ServoClass Floating Shaft Couplings
Part Number: SF060R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Floating Shaft SF060R Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
| RPM (1 to 10,000) | |
| Shaft Span (DBSE) (inches) (2.3 to 130.0) | |
SF060R Specifications
Click for English
Click for Metric
| Part Number | SF060R |
| Operating Torque: | 531 in-lbs |
| Operating Torque : | 60 Nm |
| Minimum Bore: | 0.4375 inches |
| Minimum Bore : | 11 mm |
| Maximum Bore: | 1.375 inches |
| Maximum Bore : | 35 mm |
| Maximum Speed: | See Catalog |
| Torsional Stiffness: | See Catalog (page 8) |
| Torsional Stiffness : | See Catalog (page 8) |
| Parallel Misalignment: | 0.013 inches/inch of DBSE |
| Parallel Misalignment : | 0.34 mm/meter of DBSE |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.035 inches |
| Axial Misalignment : | 0.90 mm |
| Inertia: | See Catalog (page 8) |
| Inertia : | See Catalog (page 8) |
| Weight: | See Catalog (page 8) |
| Weight : | See Catalog (page 8) |
| Outside Diameter (D): | 2.677 Inches |
| Outside Diameter (D) : | 68 mm |
| Hub Length (LB): | 0.992 Inches |
| Hub Length (LB) : | 25.2 mm |
| Reduced Hub Diameter (N): | 1.811 Inches |
| Reduced Hub Diameter (N) : | 46 mm |
| Minimum DBSE:: | 2.300" |
| Minimum DBSE: : | 58.4 mm |
| Maximum DBSE:: | See Catalog (Page 9) |
| Maximum DBSE: : | See Catalog (Page 9) |
| Inside Diameter of Flex Disc (K): | 1.220 inches |
| Inside Diameter of Flex Disc (K) : | 31 mm |
| Clamp Screw to Bore (A2): | 1.043 Inches |
| Clamp Screw to Bore (A2) : | 26.5 mm |
| Clamp Screw to Bore (A1, Reduced Hub): | 0.689" |
| Clamp Screw to Bore (A1, Reduced Hub) : | 17.5 mm |
| Clamp Screw to End of Hub (C): | 0.305 Inches |
| Clamp Screw to End of Hub (C) : | 7.75 mm |
| Clamp Screw Size (M): | M6 |
| Clamp Screw Size (M) : | M6 |
| Tightening Torque: | 124 in-lbs |
| Tightening Torque : | 14 Nm |