ServoClass Floating Shaft Couplings
Part Number: SF050R
Click image to enlarge
Click image to enlarge
Technical Resources
| ServoClass Floating Shaft SF050R Configuration | |
| Bore Size D1 | |
| Bore Size D2 | |
| RPM (1 to 10,000) | |
| Shaft Span (DBSE) (inches) (2.0 to 130.0) | |
SF050R Specifications
Click for English
Click for Metric
| Part Number | SF050R |
| Operating Torque: | 221 in-lbs |
| Operating Torque : | 25 Nm |
| Minimum Bore: | 0.375 inches |
| Minimum Bore : | 8 mm |
| Maximum Bore: | 1.1875 inches |
| Maximum Bore : | 30 mm |
| Maximum Speed: | See Catalog |
| Torsional Stiffness: | See Catalog (page 8) |
| Torsional Stiffness : | See Catalog (page 8) |
| Parallel Misalignment: | 0.011 inches/inch of DBSE |
| Parallel Misalignment : | 0.28 mm/meter of DBSE |
| Angular Misalignment: | 1 ° |
| Axial Misalignment: | 0.031 inches |
| Axial Misalignment : | 0.80 mm |
| Inertia: | See Catalog (page 8) |
| Inertia : | See Catalog (page 8) |
| Weight: | See Catalog (page 8) |
| Weight : | See Catalog (page 8) |
| Outside Diameter (D): | 2.205 inches |
| Outside Diameter (D) : | 56 mm |
| Hub Length (LB): | 0.807 Inches |
| Hub Length (LB) : | 20.5 mm |
| Reduced Hub Diameter (N): | 1.496 Inches |
| Reduced Hub Diameter (N) : | 38 mm |
| Minimum DBSE:: | 2.000" |
| Minimum DBSE: : | 50.8 mm |
| Maximum DBSE:: | See Catalog (Page 9) |
| Maximum DBSE: : | See Catalog (Page 9) |
| Inside Diameter of Flex Disc (K): | 1.024 Inches |
| Inside Diameter of Flex Disc (K) : | 26 mm |
| Clamp Screw to Bore (A2): | 0.866 inches |
| Clamp Screw to Bore (A2) : | 22 mm |
| Clamp Screw to Bore (A1, Reduced Hub): | 0.571" |
| Clamp Screw to Bore (A1, Reduced Hub) : | 14.5 mm |
| Clamp Screw to End of Hub (C): | 0.236 Inches |
| Clamp Screw to End of Hub (C) : | 6 mm |
| Clamp Screw Size (M): | M5 |
| Clamp Screw Size (M) : | M5 |
| Tightening Torque: | 62 in-lbs |
| Tightening Torque : | 7 Nm |