Aluminum Single Flex Clamp Hub A1C Composite Disc Couplings
Part Number: 6A22-A1C
Click image to enlarge
Click image to enlarge
Technical Resources
| Single Clamp Type Aluminum A1C Hubs 6a22-a1c Configuration | |
| Bore Size D1 | |
| d1 Keyway Option | |
| Bore Size D2 | |
| d2 Keyway Option | |
6A22-A1C Specifications
Click for English
Click for Metric
| Part Number | 6A22-A1C |
| Continuous Rated Torque: | 270 in-lbs |
| Continuous Rated Torque : | 30 Nm |
| Peak Rated Torque: | 540 in-lbs |
| Peak Rated Torque : | 60 Nm |
| Minimum Bore (E): | 0.500 inches |
| Minimum Bore (E) : | 12 mm |
| Maximum Bore (E): | 1.188 inches |
| Maximum Bore (E) : | 31 mm |
| Maximum Speed: | 13,500 RPM |
| Torsional Stiffness: | 2,680 In-lbs/degree |
| Torsional Stiffness : | 17,350 Nm/rad |
| Parallel Misalignment: | 0.006 inches |
| Parallel Misalignment : | 0.15 mm |
| Angular Misalignment: | 2 ° |
| Axial Misalignment: | 0.035 inches |
| Axial Misalignment : | 0.9 mm |
| Weight at Max Bore: | 0.73 lbs |
| Weight at Max Bore : | 0.33 kg |
| Weight at Min Bore: | 0.90 lbs |
| Weight at Min Bore : | 0.41 kg |
| Inertia at Max Bore: | 0.65 lb-in² |
| Inertia at Max Bore : | 1.9 kg-cm² |
| Inertia at Min Bore: | 0.72 lb-in² |
| Inertia at Min Bore : | 2.1 kg-cm² |
| Outside Diameter (A): | 2.44 inches |
| Outside Diameter (A) : | 62.0 mm |
| Overall Length (L): | 2.27 inches |
| Overall Length (L) : | 57.7 mm |
| Hub Length (B): | 1.02 inches |
| Hub Length (B) : | 26.0 mm |
| Distance Between Shaft Ends (C): | 0.23 inches |
| Distance Between Shaft Ends (C) : | 5.7 mm |
| Inside Diameter of Disc-Pack (H): | 0.98 inches |
| Inside Diameter of Disc-Pack (H) : | 24.9 mm |
| Clamp Screw to Bore (R): | 0.87 inches |
| Clamp Screw to Bore (R) : | 22.0 mm |
| Clamp Screw to End of Hub (G): | 0.29 inches |
| Clamp Screw to End of Hub (G) : | 7.2 mm |
| Clamp Bolt Size (D): | M6 |
| Tightening Torque (D): | 115 in-lbs |
| Tightening Torque (D) : | 13 Nm |