Double Clamp Aluminum A1C Hubs

Part Number: 6P37-A1C

Quantity:
 
Click image to enlarge
Specifications
Click for English
Click for Metric
  • Continuous Rated Torque: 1,600 in-lbs
  • Continuous Rated Torque : 181 Nm
  • Peak Rated Torque: 3,200 in-lbs
  • Peak Rated Torque : 362 Nm
  • Minimum Bore (E): 0.750 inches
  • Minimum Bore (E) : 18 mm
  • Maximum Bore (E): 2.000 inches
  • Maximum Bore (E) : 51 mm
  • Maximum Speed: 7,900 RPM
  • Torsional Stiffness: 5,051 In-lbs/degree
  • Torsional Stiffness : 32,700 Nm/rad
  • Parallel Misalignment: 0.039 inches
  • Parallel Misalignment : 0.99 mm
  • Angular Misalignment: 2 °
  • Axial Misalignment: 0.142 inches
  • Axial Misalignment : 3.6 mm
  • Weight at Max Bore: 4.48 lbs
  • Weight at Max Bore : 2.03 kg
  • Weight at Min Bore: 5.36 lbs
  • Weight at Min Bore : 2.43 kg
  • Inertia at Max Bore: 10.8 lb-in²
  • Inertia at Max Bore : 31.7 kg-cm²
  • Inertia at Min Bore: 11.3 lb-in²
  • Inertia at Min Bore : 33.1 kg-cm²
  • Outside Diameter (A): 3.98 inches
  • Outside Diameter (A) : 101 mm
  • Overall Length (L): 5.28 inches
  • Overall Length (L) : 134 mm
  • Hub Length (B): 1.81 inches
  • Hub Length (B) : 46.0 mm
  • Distance Between Shaft Ends (C): 1.65 inches
  • Distance Between Shaft Ends (C) : 42.0 mm
  • Inside Diameter of Disc-Pack (H): 1.51 inches
  • Inside Diameter of Disc-Pack (H) : 38 mm
  • Clamp Screw to Bore (R): 1.42 inches
  • Clamp Screw to Bore (R) : 36.0 mm
  • Clamp Screw to End of Hub (G): 0.50 inches
  • Clamp Screw to End of Hub (G) : 12.7 mm
  • Clamp Bolt Size (D): M12
  • Tightening Torque (D): 74 ft-lbs
  • Tightening Torque (D) : 100 Nm
Double Clamp Aluminum A1C Hubs

Adobe 3D PDF help
Configuration
Bore Size D1