Double Clamp Aluminum A1C Hubs
Part Number: 6P30-A1C
Click image to enlarge
Specifications
Click for English
Click for Metric
- Continuous Torque: 800 in-lbs
- Continuous Rated Torque : 90 Nm
- Peak Rated Torque: 1,600 in-lbs
- Peak Rated Torque : 180 Nm
- Minimum Bore (E): 0.688 Inches
- Minimum Bore (E) : 16 mm
- Maximum Bore (E): 1.500 inches
- Maximum Bore (E) : 40 mm
- Maximum Speed: 9,500 RPM
- Torsional Stiffness: 3,232 In-lbs/degree
- Torsional Stiffness : 20,923 Nm/rad
- Parallel Misalignment: 0.033 inches
- Parallel Misalignment : 0.84 mm
- Angular Misalignment: 2 °
- Axial Misalignment: 0.102 inches
- Axial Misalignment : 2.6 mm
- Weight at Max Bore: 2.14 lbs
- Weight at Max Bore : 0.97 kg
- Weight at Min Bore: 2.51 lbs
- Weight at Min Bore : 1.14 kg
- Inertia at Max Bore: 3.42 lb-in²
- Inertia at Max Bore : 10.0 kg-cm²
- Inertia at Min Bore: 3.76 lb-in²
- Inertia at Min Bore : 11.0 kg-cm²
- Outside Diameter (A): 3.23 inches
- Outside Diameter (A) : 82.0 mm
- Overall Length (L): 3.90 inches
- Overall Length (L) : 99.0 mm
- Hub Length (B): 1.28 inches
- Hub Length (B) : 32.5 mm
- Distance Between Shaft Ends (C): 1.34 inches
- Distance Between Shaft Ends (C) : 34.0 mm
- Inside Diameter of Disc-Pack (H): 1.21 inches
- Inside Diameter of Disc-Pack (H) : 31 mm
- Clamp Screw to Bore (R): 1.09 inches
- Clamp Screw to Bore (R) : 27.8 mm
- Clamp Screw to End of Hub (G): 0.39 inches
- Clamp Screw to End of Hub (G) : 10.0 mm
- Clamp Bolt Size (D): M10
- Tightening Torque (D): 513 in-lbs
- Tightening Torque (D) : 58 Nm
Technical Resources
| Configuration | |
| Bore Size D1 | |
| d1 Keyway Option | |
| Bore Size D2 | |
| d2 Keyway Option | |
Double Clamp Aluminum A1C Hubs
Part Number: 6P30-A1C
Technical Resources
