Aluminum Double Flex Clamp Hub A1C Composite Disc Couplings
Part Number: 6P26-A1C
Click image to enlarge
Click image to enlarge
Technical Resources
| Double Clamp Type Aluminum A1C Hubs 6p26-a1c Configuration | |
| Bore Size D1 | |
| d1 Keyway Option | |
| Bore Size D2 | |
| d2 Keyway Option | |
6P26-A1C Specifications
Click for English
Click for Metric
| Part Number | 6P26-A1C |
| Continuous Rated Torque: | 475 in-lbs |
| Continuous Rated Torque : | 53 Nm |
| Peak Rated Torque: | 950 in-lbs |
| Peak Rated Torque : | 106 Nm |
| Minimum Bore (E): | 0.563 inches |
| Minimum Bore (E) : | 14 mm |
| Maximum Bore (E): | 1.375 inches |
| Maximum Bore (E) : | 35 mm |
| Maximum Speed: | 11,500 RPM |
| Torsional Stiffness: | 1,500 In-lbs/degree |
| Torsional Stiffness : | 9,712 Nm/rad |
| Parallel Misalignment: | 0.022 inches |
| Parallel Misalignment : | 0.56 mm |
| Angular Misalignment: | 2 ° |
| Axial Misalignment: | 0.087 inches |
| Axial Misalignment : | 2.2 mm |
| Weight at Max Bore: | 1.19 lbs |
| Weight at Max Bore : | 0.54 kg |
| Weight at Min Bore: | 1.43 lbs |
| Weight at Min Bore : | 0.65 kg |
| Inertia at Max Bore: | 1.40 lb-in² |
| Inertia at Max Bore : | 4.1 kg-cm² |
| Inertia at Min Bore: | 1.47 lb-in² |
| Inertia at Min Bore : | 4.3 kg-cm² |
| Outside Diameter (A): | 2.74 inches |
| Outside Diameter (A) : | 69.5 mm |
| Overall Length (L): | 3.19 inches |
| Overall Length (L) : | 81.0 mm |
| Hub Length (B): | 1.16 inches |
| Hub Length (B) : | 29.5 mm |
| Distance Between Shaft Ends (C): | 0.87 inches |
| Distance Between Shaft Ends (C) : | 22.0 mm |
| Inside Diameter of Disc-Pack (H): | 1.00 inches |
| Inside Diameter of Disc-Pack (H) : | 25.4 mm |
| Clamp Screw to Bore (R): | 0.95 inches |
| Clamp Screw to Bore (R) : | 24.0 mm |
| Clamp Screw to End of Hub (G): | 0.36 inches |
| Clamp Screw to End of Hub (G) : | 9.1 mm |
| Clamp Bolt Size (D): | M8 |
| Tightening Torque (D): | 283 in-lbs |
| Tightening Torque (D) : | 32 Nm |