Home > Overhung Load Adaptors > SAE A Mount > Model 200 SAE A Mount Overhung Load Adaptors

Model 200 SAE A Mount Overhung Load Adaptors

Click image to enlarge

Model 200 overhung load adaptors are compatible with shaft diameters up to 1” and provide the following features:

Accepts speeds up to 3800 RPM with proper lubrication (contact factory for higher speeds)
Deep-grooved ball bearings
Input bore dimensions including 1” keyed, 5/8” keyed, 3/4” keyed and 9 tooth 16/32 spline
2-bolt mount

Our in-stock standard load adaptors are available for immediate shipment. Request a quote for any of our overhung load adaptor options listed below or contact us to discuss your custom requirements.

Sizing specifications for the 200 Series SAE A mount overhung load adaptors are as follows:

Model 210(-DP) SAE A OHLA

Output Shaft - Keyway: 1.000 - 1/4 x 1/8
Input Bore - Keyway: 1.000 - 1/4 x 1/8
DP = Deep Pilot (option)

Model 210-10(-DP) SAE A OHLA

Output Shaft - Keyway: 1.000 - 1/4 x 1/8
Input Bore - Keyway: 0.625 - 5/32 x 5/64
DP = Deep Pilot (option)

Model 210-12(-DP) SAE A OHLA

Output Shaft - Keyway: 1.000 - 1/4 x 1/8
Input Bore - Keyway: 0.750 - 3/162 x 3/32
DP = Deep Pilot (option)

Model 210-9S(-DP) SAE A OHLA

Output Shaft - Keyway: 1.000 - 1/4 x 1/8
Input Bore - 9-Tooth 16/32 Spline
DP = Deep Pilot (option)

Model 215(-DP) SAE A OHLA

Output Shaft - Keyway: 1.500 - 3/8 x 3/16
Input Bore - Keyway: 1.000 - 1/4 x 1/8
DP = Deep Pilot (option)

Model 215-12(-DP) SAE A OHLA

Output Shaft - Keyway: 1.500 - 3/8 x 3/16
Input Bore - Keyway: 0.750 - 3/162 x 3/32
DP = Deep Pilot (option)

Model 210-F(-DP) SAE A OHLA

Output Shaft - Keyway: 1.00 Bore - 1/4 x 1/8
Input Bore - Keyway: 1.00 - 1/4 x 1/8
DP = Deep Pilot (option)