Torq-Tender®, H-TLC
Mechanical Torque Limiters
and Phas-Lok® Adjusting Hubs

Torq-Tender®: Torq -Tenders are positive drive couplings which provide accurate overload protection in many mechanical power transmission systems. When a jam-up or excess overload occurs, Torq - Tenders disengage motor drives.

When load exceeds the rating determined by precision tempered torque springs, the unit's drive key pivots out of a slot to disengage the coupling. Once the overload is removed and speed reduced, the Torq-Tender resets itself automatically.

H-TLC: The Torque Setting Is Adjustable. If operating conditions require periodic changes in torque settings, the H-TLC gives you that ability. Simply adjust the unit's external compression bolts until the desired new setting is reached.

It works on a spring- loaded convex pin and detent design which reacts to overloads...but not to lubricants. Unlike friction-type designs, you can submerge an H-TLC in oil and still depend on precise disengagement at your design limits.

Phas-Lok^® Adjusting Hubs Provide Easy and Accurate Phase Adjustment

The Phas-Lok^® Adjusting Hub is an economical, precision device that provides an easy way to change phase relationships in equipment operation.

 

The right to make engineering refinements on all products is reserved.
Dimensions and other details subject to change.
When dimensions are critical, detailed drawings should be obtained from the factory.

Send mail to zero-max@zero-max.com with questions or comments about this web site.
13200 Sixth Avenue North • Plymouth, MN 55441
1-800-533-1731 • 763-546-4300 • Fax:763-546-8260

Copyright^© 2007 Zero-Max, Inc.