Torq-Tender®
Disk Actuator Dimensions

 

Go to J Model

Go to JF Model

 
Torq-Tender Actuating Disc Standard Model
Torq-Tender Actuating Disc Bushing Model)
Torq-Tender
Models		 TT1X TT2 TT2X TT3 TT3X TT4X
A INCH
(MM)		 1.562
(39.7)		 2.165
(55)		 2.500
(63.5)		 3.000
(76.2)		 3.625
(92.1)		 4.625
(117.5)
B INCH
(MM)		 .875
(22.2)		 1.250
(31.7)		 1.500
(38.1)		 1.750
(44.4)		 2.250
(57.1)		 3.000
(76.2)
G INCH
(MM)		 1.000
(25.4)		 1.375
(34.9)		 1.625
(41.3)		 1.750
(44.4)		 2.500
(63.5)		 3.000
(76.2)
K INCH
(MM)		 1.800
(45.7)		 2.420
(61.5)		 2.950
(75)		 3.470
(88.1)		 4.550
(115.6)		 5.415
(137.5)
L INCH
(MM)		 .600
(15.2)		 .750
(19)		 1.000
(25.4)		 1.187
(30.1)		 1.250
(31.7)		 1.330
(33.8)
N INCH
(MM)		 .500
(12.7)		 .625
(15.9)		 .875
(22.2)		 1.062
(27)		 1.080
(27.4)		 1.125
(28.6)
X INCH
(MM)		 2.985
(75.8)		 3.485
(88.5)		 3.935
(100)		 4.480
(113.8)		 4.980
(126.5)		 6.250
(158.7)
Y INCH
(MM)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 1.187
(30.1)
Z INCH
(MM)		 .080
(2)		 .498
(12.6)		 .740
(18.8)		 1.148
(29.1)		 1.985
(50.4)		 2.516
(63.9)
Z1 INCH
(MM)		 .120
(3)		 .120
(3)		 .120
(3)		 .120
(3)		 .120
(3)		 .120
(3)

 
Torq-Tender Actuating Disc J Model
Torq Tender
Models		 TT2J TT3J
A INCH
(MM)		 2.165
(55)		 3.000
(75.9)
G INCH
(MM)		 1.625
(41.3)		 2.250
(57.1)
K INCH
(MM)		 2.110
(53.6)		 3.294
(83.7)
N INCH
(MM)		 .625
(15.9)		 1.062
(27)
L INCH
(MM)		 .750
(19)		 1.187
(30.2)
X INCH
(MM)		 3.485
(88.5)		 4.480
(113.8)
Y INCH
(MM)		 .970
(24.6)		 .970
(24.6)
Z INCH
(MM)		 .921
(23.4)		 .870
(22.1)
Z1 INCH
(MM)		 .121
(3.1)		 .120
(3)
Return to Top of Page
Torq-Tender Actuating Disc JF Model
Torq Tender
Models		 TT1XJF TT2JF TT2XJF TT3JF TT3XJF TT4XJF
AA INCH
(MM)		 1.530
(38.9)		 2.032
(51.6)		 2.450
(62.2)		 2.895
(73.5)		 3.550
(90.2)		 4.525
(114.9)
K INCH
(MM)		 1.500
(38.1)		 1.875
(47.6)		 2.250
(57.1)		 2.625
(66.7)		 3.550
(90.2)		 4.375
(111.1)
Q INCH
(MM)		 1.250
(31.7)		 1.750
(44.4)		 2.000
(50.8)		 2.375
(60.3)		 3.000
(76.2)		 4.000
(101.6)
R INCH 10-32
x .25 DP		 10-32
X .37 DP		 1/4-20
x .62 DP		 5/16-18
x .50 DP		 5/16-18
x .62 DP		 3/8-16
x .75 DP
X INCH
(MM)		 2.980
(75.7)		 3.486
(88.5)		 3.935
(99.9)		 4.480
(113.8)		 4.980
(126.5)		 6.250
(158.7)
Y INCH
(MM)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 .970
(24.6)		 1.187
(30.1)
Z INCH
(MM)		 .373
(9.5)		 .480
(12.2)		 .790
(20.1)		 1.083
(27.5)		 1.918
(48.7)		 1.187
(30.1)
Z1 INCH
(MM)		 .120
(3)		 .120
(3)		 .120
(3)		 .120
(3)		 .120
(3)		 .125
(3.2)


 

Return to Top of Page

  

 

The right to make engineering refinements on all products is reserved.
Dimensions and other details subject to change.
When dimensions are critical, detailed drawings should be obtained from the factory.

Send mail to zero-max@zero-max.com with questions or comments about this web site.
13200 Sixth Avenue North • Plymouth, MN 55441
1-800-533-1731 • 763-546-4300 • Fax:763-546-8260

Copyright© 2007 Zero-Max, Inc.