ServoClass® Dimensions


Single Disc Dimensions Chart
  Bore
d1 & d2		  
Size Min
inch
mm		 Max
inch
mm		 Outside
Diameter
D		 Overall
Length
L		 Hub
Length
LB		 Spacer
Gap
S		 Clamp
Screw
Size
M
SD005 0.157
4.0		 0.236
6.0		 0.63
16.0		 0.63
16.0		 0.295
7.5		 0.039
1.0		 2-M2.0
SD010 0.1875
4.0		 0.250
7.0		 0.75
19.0		 0.78
19.9		 0.35
9.0		 0.075
1.9		 2-M2.5
SD020 0.250
5.0		 0.375
10.0		 1.02
26.0		 0.93
23.5		 0.41
10.5		 0.098
2.5		 2-M2.5
SD030 0.250
6.0		 0.500
14.0		 1.34
34.0		 1.07
27.1		 0.47
12.0		 0.122
3.1		 2-M3.0
SD035 0.375
8.0		 0.625
16.0		 1.54
39.0		 1.34
34.1		 0.59
15.0		 0.161
4.1		 2-M4.0
SD040 0.375
8.0		 0.750
19.0		 1.73
44.0		 1.34
34.1		 0.59
15.0		 0.161
4.1		 2-M4.0
SD050 0.4375
10.0		 1.000
25.0		 2.20
56.0		 1.77
45.0		 0.79
20.0		 0.197
5.0		 2-M5.0
SD060 0.625
15.0		 1.125
30.0		 2.68
68.0		 2.13
54.0		 0.95
24.0		 0.240
6.0		 2-M6.0
SD080 0.8125
20.0		 1.375
35.0		 3.23
82.0		 2.99
76.0		 1.18
30.0		 0.320
8.0		 2-M8.0
Double Disc Dimensions Chart
  Bore
d1 & d2		  
Size Min
inch
mm		 Max
inch
mm		 Outside
Diameter
D		 Overall
Length
L		 Hub
Length
LB		 Center
Member
LC		 Spacer
Gap
S
Clamp
Screw
Size
M
SC005 0.157
4.0		 0.236
6.0		 0.63
16.0		 .87
22.0		 0.295
7.5		 0.20
5.0		 0.039
1.0		 2-M2.0
SC010 0.1875
4.0		 0.250
7.0		 0.75
19.0		 1.08
27.5		 0.35
9.0		 0.20
5.0		 0.089
2.25		 2-M2.5
SC020 0.250
5.0		 0.375
10.0		 1.02
26.0		 1.26
32.0		 0.41
10.5		 0.24
6.0		 0.098
2.5		 2-M2.5
SC030 0.250
6.0		 0.500
14.0		 1.34
34.0		 1.46
37.0		 0.47
12.0		 0.28
7.0		 0.118
3.0		 2-M3
SC035 0.375
8.0		 0.625
16.0		 1.54
39.0		 1.85
47.0		 0.59
15.0		 0.35
9.0		 0.158
4.0		 2-M4
SC040 0.375
8.0		 0.750
19.0		 1.73
44.0		 1.85
47.0		 0.59
15.0		 0.35
9.0		 0.158
4.0		 2-M4
SC050 0.4375
10.0		 1.000
25.0		 2.20
56.0		 2.40
61.0		 0.79
20.0		 0.43
11.0		 0.20
5.0		 2-M5
SC060 0.625
15.0		 1.125
30.0		 2.68
68.0		 2.91
74.0		 0.95
24.0		 0.55
14.0		 0.240
6.0		 2-M6.0
SC080 0.8125
20.0		 1.375
35.0		 3.23
82.0		 3.86
98.0		 1.18
30.0		 0.87
22.0		 0.320
8.0		 2-M8.0

The shafts of the equipment (up to the maximum bore size of the coupling) may be extended into the interior of the coupling without any modification to the ServoClass® Coupling. However, the ends of the shafts must never touch each other.

 

For more detailed information please download the ServoClass PDF catalog

Return to top

The right to make engineering refinements on all products is reserved.
Dimensions and other details subject to change.
When dimensions are critical, detailed drawings should be obtained from the factory.

Send mail to zero-max@zero-max.com with questions or comments about this web site.
13200 Sixth Avenue North • Plymouth, MN 55441
1-800-533-1731 • 763-546-4300 • Fax:763-546-8260

Copyright© 2007 Zero-Max, Inc.