ETP-Classic®

Available in Inch and Metric Sizes

• 50 bore sizes from .750" through 4.0" (15mm to 100mm)
• All steel components including steel clamping screws, pressure flange, piston, sealing ring, and double-walled sleeve
• Precision finish
• Temperature range -22°F to +180°F
• Rated Torques: 41 - 11,431 ft. lbs.
• Rated Axial Forces: 1,635 - 69,440lbs.

 

Go to Inch Sizes

Go to Metric Sizes




T Rated is transmittable torque when axial force is 0.
F Rated is transmittable axial force when torque is 0.
Temperature: Max 180°F, Min -22°F
Part No. d
Inch		 D
mm		 D1
mm		 D2
mm		 L
mm		 L1
mm		 L2
mm		 T
Rated
ft. lbs.		 F
Rated
lbs.		 Screw
Tightening
Torque
ft. lbs		 Hex
Key
Size
mm		 No. of
Screws 		Weight
Ounces
ETP 3/4

0.75

28 45 35 21 37 42 65 2100 5.1 4 3 6
ETP 7/8

0.875

32 49 40 22 37 42 100 2700 5.9 4 4 7
ETP 15/16

0.9375

34 49 40 25 40 45 130 3300 5.9 4 4 7
ETP 1
 1 35 51 41.5 27 43 48 144 3600 5.9 4 4 7
ETP 1 1/8
 1.125 39 55 46 29 45 50 207 4400 5.9 4 4 9
ETP 1 3/16
 1.875 41 57 47.5 32 47 52 250 5100 5.9 4 4 10
ETP 1 1/4
 1.25 43 60 50.5 34 52 58 302 5800 9.6 5 4 12
ETP 1 5/16
 1.3125 45 63 52 35 53 59 350 6400 9.6 5 6 13
ETP 1 3/8
 1.375 47 63 53.5 37 55 60 398 7000 5.9 4 6 14
ETP 1 7/16
 1.4375 50 65 56 37 55 60 428 7100 5.9 4 6 14
ETP 1 1/2
 1.5 52 68 59 41 59 64 516 9300 5.9 4 6 15
ETP 1 5/8
 1.625 55 70 61 44 65 70 626 9300 5.9 4 6 19
ETP 1 11/16
 1.6875 58 76 65 47 66 74 723 10300 9.6 5 6 20
ETP 1 3/4
 1.75 59 77 66.5 49 69 75 870 11900 9.6 5 6 25
ETP 1 15/16
 1.9375 65 83 72.5 52 76 82 1070 13100 9.6 5 6 30
ETP 2
 2 68 87 76 53 76 82 1550 14400 9.6 5 6 31
ETP 2 3/16
 2.1875 74 92 81 58 84 90 2068 17200 9.6 5 8 37
ETP 2 7/16
 2.4375 87 99 88 60 87 93 2280 20300 9.6 5 8 41
ETP 2 1/2
 2.5 84 107 93 62 88 96 2280 22000 23.6 6 6 57
ETP 2 15/16
 2.9375 95 118 104 85 114 122 3925 34400 23.6 6 6 88
ETP 3
 3 98 121 107 74 103 111 3925 31300 23.6 6 6 90
ETP 3.4375
 3.4375 110 132 119 90 120 128 5850 40700 23.6 6 7 113
ETP 3 15/16
 3.9375 125 148 134 110 145 153 9200 59300 23.6 6 8 172
ETP 4
 4 130 155 141 97 132 140 9200 59300 23.6 6 8 180

Go to Metric Sizes

Go back to Top of Page

 

The right to make engineering refinements on all products is reserved.
Dimensions and other details subject to change.
When dimensions are critical, detailed drawings should be obtained from the factory.

Send mail to zero-max@zero-max.com with questions or comments about this web site.
13200 Sixth Avenue North • Plymouth, MN 55441
1-800-533-1731 • 763-546-4300 • Fax:763-546-8260

Copyright© 2007 Zero-Max, Inc.