Adjustable Speed Drives

Externally, the Zero-Max Drive consists of a rugged, sealed cast case, an input shaft, output shaft and speed control. Speed of the output shaft is regulated precisely and easily through a control lever which includes a convenient locking mechanism or a screw control to hold speed at a desired setting. Models are available with output in clockwise or counter-clockwise rotation to meet individual speed control requirements. Two models are equipped with a reversing lever that permits clockwise, neutral and counter-clockwise operation.

The general principle of operation of Zero-Max Drives gives infinitely adjustable speed by changing the distance that four or more one-way clutches rotate the output shaft when they move back and forth successively. The number of strokes per clutch per minute is determined by the input speed. Since one rotation of the input shaft causes each clutch to move back and forth once, it is readily apparent that the input speed will determine the number of strokes or urgings the clutches give the output shaft per minute.

For example, with four clutches working in series and an input of 1800 RPM, the output shaft is urged 7200 times per minute (1800 x 4) or 120 times per second (7200 ÷ 60). If the input speed is dropped to 900 RPM, the shaft is urged only 3600 times per minute and the maximum output speed will be cut in half.

Looking at Figure 1, the input section, consisting of a shaft (A), eccentrics (B), and connecting rods (C), converts rotary motion into linear motion. At the zero setting, the main links (D) pivot on points (H) and (J) without moving the clutches. At any setting other than zero, the clutches (E) transfer the linear motion back into rotary motion and drive the output shaft (F). A control link (G) swings through arc (K) when the control lever is moved. At any point along arc (K) a different output speed is produced because the direction of throw of the connecting rod is altered from vertical (Figure 1 zero RPM position) toward horizontal (Figure 2 maximum speed position), varying the length of the strokes the main links deliver to the overrunning clutches.

Features

• Compact and easy to handle.
• Simple to install. No special wiring or training.
• Easy to operate with lever or screw control. Repeatable
• Use anywhere on machine. Accepts input to 2,000 RPM. Ideal secondary controller.
• Delivers constant torque throughout the speed range.
• 4:1 speed reduction. Often usable without additional speed reduction.

Benefits

• Permits slow or fast, small or large speed changes. Speed set-ups are made quickly and easily. Ideal for dancer applications / constant speed changes.
• Leave at one setting. No daily speed cycling.
• Accurate speed holding. No "wear-in" period / constant speed operation.
• Accepts any input. It's the world's most versatile, economical secondary drive.
• Goes to zero output. Ideal for use as a cluch.
• Simple maintenance. Factory lubricated.
• Low cost and proven design. More than 1,000,000 sold. Ideal for users and original equipment manufacturers.
• Sealed housing. Use in most atmospheres. Can be mounted in any position.
• Versatile shaft / control / motor options.
• Infinitely adjustable. 0-400 RPM speed range with 1800 RPM input.

To achieve the exact performance characteristics you desire, Zero-Max provides the following matching components:

For Model E and JK Drives, a selection of gearheads and motors is available.

For models Y, QX and ZX Drives, C-Flange adapters are available for connecting customer supplied motors to the drive you have selected.

Lever control is standard on all drives. Optional controls include: screw control, extended screw control, extended lever control, extended control shaft, plus flatted and drilled control levers.

Direction of output rotation must be specified and is independent of input direction. Model numbers ending in "1" are CCW output, "2" are CW output and "3" are reversible.

Zero-Max variable speed drives are used on a wide variety of machinery. They may be used as a primary or secondary drive and are available with several control options and shaft arrangements.

Applications include: textile machinery such as looms; food processing machinery such as hamburger presses; agricultural machinery including grain dryers and seeder drives; printing presses utilizing high speed sheeters for stacking finished sheets; metalworking machinery; packaging systems, automated sewing systems, conveying and specialized machines.